Haydon

Key Features:

• Operating Voltage: 3VDC or 24VDC
• Nominal Current Consumption: 5mA
• Enclosure Material: Plastic
• Fits standard single gang plastic gang box: not supplied
• Dimensions: W.86 x L.86 x H.15mm
• Weight: 0.1kg
• Warranty: 3 years

FIRE SHROUDS RED Pack of 10

200mm x 4.6mm Stainless Steel Cable Ties 100pk

HAY-HDPVB02 Twin Pack - Single CH Power and Video Balun up to 200m 12VDC Power Twin Pack

300mm x 4.6mm Stainless Steel Cable Ties 100pk

Key Features:

• Operating Voltage: 24VDC + 10%
• Nominal Current Consumption: 22mA
• Relay: Double Pole
• Relay Rating, 5A @ 250V AC
• Relay Coil Impendence: 1067 Ohms
• Enclosure Material: Plastic
• Dimensions: W.86 x L.86 x H.62mm (faceplate)
• Surface Back Box Supplied
• Weight: 0.2kg
• Warranty: 3 years

350mm x 4.6mm Stainless Steel Cable Ties 100pk

Key Feature:

• Operating Voltage: 100~240Vac
• Switch Contact: Double Pole (Live and Negative)
• Fuse Rating: 230Vac, F4A
• Switch Surge Rating: 80A
• When in the OFF position the fuse is disconnected from the supply
• Enclosure Material: Plastic
• Weight: 0.26kg
• Housing Size: W.86 x L.86 x H.62mm
• Warranty: 3 Years

2v 5 amp access control PSU. Houses 2 x Paxton NET2 controllers as standard. 4 switchable outputs via fire relay fuse board.

• 2 Board Paxton Power Supply

• 4 Way Fire Interface Fuse Board

• Interface Switching Via NC, NO + or - (5-24vdc)

• Battery Backed - 7AH Capacity

• 12vdc 5 Amp Power Module

• Metal Standoffs included

• Main Fuse: F3A

• Number of Outputs: 1 x 8 amp in 12v mode

• Additional Outputs: Mains and Independent relays

• Panel Indicators: Mains/Fault

• Protection: Over-current/ Over-load/ Over-charge/Over-discharge

• Tamper: Front and Rear

• Battery Capacity: 2 x 12v/ 7Ah Max

• Dimensions: W 330 x H 365 x D 85 mm

27.6V DC EN54 PSU, 1 Amp small enclosure 275*330*80

EN54-4 +A1 +A2 Certified Power Supply Units Compliant with Fire

Detection and Alarm systems

EN54-4 +A1 +A2 Certified Power Supply Units Compliant with Fire

Detection and Alarm systems

• Main Fuse: F3A

• Number of Outputs: 8 x 1 amp in 12v mode

• Additional Outputs: Mains and Independent relays

• Battery Capacity: 2 x 12v/ 7Ah Max

• Tamper: Front and Rear

• Dimensions: W 330 x H 365 x D 85 mm

27.6V DC EN54 PSU, 2 Amp large enclosure 420*400*80

EN54-4 +A1 +A2 Certified Power Supply Units Compliant with Fire

Detection and Alarm systems

EN54-4 +A1 +A2 Certified Power Supply Units Compliant with Fire

Detection and Alarm systems

12/24v 8/4 Amp Access Control PSU. Houses 6 Paxton Net2 or ACT Controllers as standard. 8 switchable outputs.

• 2 Board Paxton Power Supply

• 4 Way Fire Interface Fuse Board

• Interface Switching Via NC, NO + or - (5-24vdc)

• Battery Backed - 7AH Capacity

• 12vdc 5 Amp Power Module

• Metal Standoffs included